Blog / Phones & Gadgets /

Router settings worth changing on day one

You plug in a new router, connect your phone, the little lights glow and everything works. Job done?

Not quite. A router that works is not the same as a router that’s set up well. The defaults are chosen to make setup easy, not to keep you safe or give you the best connection. Fifteen minutes on day one is worth it, and most of it is changing text boxes.

Before you start

Connect to the router, then open its admin page. The address is usually printed on a label on the router, often something like 192.168.0.1 or 192.168.1.1, or a short web address. The default username and password are on the label too.

Some routers come from a broadband provider and have limited settings. Some are managed through a phone app instead. The names below vary between brands, so look for the closest match.

1. Change the admin password

This is the one most people skip, and it matters most. The admin login is not your Wi-Fi password. It’s the key to the router’s settings, and the default is often printed on the device and widely known.

  • Use a long, unique password.
  • Store it in a password manager.
  • If the router lets you change the username, do that too.

2. Set a proper Wi-Fi name and password

  • Network name (SSID): Change it from the default, but don’t include your name, address or flat number. A default name sometimes reveals the router model, which tells attackers what to look for.
  • Wi-Fi password: Use a long passphrase, not a short word. Length beats cleverness. Avoid anything on the label if it’s easy to guess.
  • Security mode: Choose WPA2 or WPA3 where offered. Avoid WEP and open networks. If you see “WPA2/WPA3 mixed”, that’s fine for compatibility with older devices.

3. Update the firmware

Routers run software, and that software has bugs and security holes. Manufacturers release updates to fix them. Some routers update themselves; many don’t. Look for a “firmware” or “system update” section and install the latest version. Then check again every few months.

Do this before you rely on the router, because a bad update mid-day is annoying.

4. Turn off features you don’t use

Every extra feature is extra attack surface. Check for:

  • WPS (the push-button or PIN pairing feature). It’s convenient but has known weaknesses. If you don’t need it, turn it off.
  • Remote management (access to the admin page from the internet). Keep it off unless you have a specific reason.
  • UPnP, which lets devices open ports automatically. It’s useful for some games and apps, and also a risk. If you don’t know you need it, consider turning it off, and see if anything stops working.
  • Guest or admin features you don’t use, such as old file-sharing or USB services.

5. Make a guest network

Most routers can broadcast a second network for visitors. It keeps guests off your main devices (laptops, printers, file shares) and means you can share a password without sharing access to everything.

If you have smart-home devices of uncertain quality, you can put them on the guest network too.

6. Pick the right channels and bands

Most modern routers broadcast on 2.4 GHz and 5 GHz, and some on 6 GHz.

  • 2.4 GHz reaches further and passes through walls better, but it’s slower and crowded.
  • 5 GHz is faster and less crowded but covers less distance.

For most homes, leave channel selection on auto. If you live in a block with many networks and the connection is flaky, try a fixed channel after checking which are least crowded using a free Wi-Fi analyser app. Don’t spend long here unless there’s a problem.

Where possible, give the two bands the same name so devices choose automatically, unless an older gadget struggles. If it does, split them.

7. Set the router’s position, not just its settings

This isn’t a setting, but it’s the cheapest improvement. Put the router up high, in the middle of the home, away from thick walls, metal and microwaves. A hidden router at the far end of the flat has a weaker signal than any setting can fix.

8. Check DNS

By default, your router uses your provider’s DNS servers. Some people prefer a public DNS service for speed or filtering. It’s optional, and it’s worth knowing where to find the setting if you ever need to troubleshoot. If you run a website, remember that this is about how your devices look up addresses, not about your site’s own DNS records.

9. Back up the settings

Once you’re happy, export the configuration if the router lets you. If you ever have to reset it, you’ll thank yourself. Keep the file somewhere safe, because it can contain sensitive details.

10. Note down the essentials

On a card or in a password manager, record:

  • the router’s admin address and login,
  • the Wi-Fi name and password,
  • your internet provider’s contact details and account number,
  • the router’s model.

When the internet goes down, you won’t want to search for these.

If you work from home

A router matters more when your livelihood is online. Consider whether it’s worth:

  • an Ethernet cable from the router to your work computer, which is faster and steadier than Wi-Fi,
  • a small UPS or power bank to keep the router running through short power cuts (check the voltage first),
  • a mobile data backup on your phone for emergencies.

If you manage client websites, a stable, safe network is part of the job. Don’t log in to hosting and admin dashboards over a network that the whole street can join.

Key takeaways

  • Change the admin password before anything else.
  • Use WPA2 or WPA3 with a long passphrase.
  • Update firmware, then turn off remote management, WPS and what you don’t use.
  • Make a guest network.
  • Placement beats most tweaks.

When did you last change your router password?