Blog / Phones & Gadgets /

Smartwatch battery life: why it varies so much

Two smartwatches arrive in a shop. One says “up to 2 days.” Another says “up to 14 days.” A third says “up to 40 hours in GPS mode.” Which one is lying?

Probably none of them. The numbers are measured under different conditions, with different screens, different features and different definitions of “normal use”. Battery life on a smartwatch isn’t one number. It’s the result of a handful of choices, and once you understand them, you can read a spec sheet and set up your own watch to last much longer.

The short answer

A smartwatch’s battery life depends mainly on the screen, the sensors, the chip and the software, and then on how you use it. A bright always-on display, constant GPS and a cellular connection are the main reasons a watch struggles to last a day. A dimmer, simpler display and fewer features are how others stretch to weeks.

Why the claims differ so much

1. The screen

The display is typically the biggest drain.

  • AMOLED and OLED screens look vivid and bright, but use more power, especially when always on.
  • Memory-in-pixel (transflective) screens, used on some sports watches, use very little power and are readable in sunlight, but look less rich indoors.
  • Always-on display: lighting the screen all day costs a lot. A “raise to wake” setting, where it lights only when you look, saves a big chunk.
  • Brightness and screen size. Bigger and brighter costs more.

2. The software

Some watches run a full operating system with apps, background syncing, voice assistants and rich animations. Others run a lean, simpler system. A leaner system usually lasts longer, but you give up apps.

3. The chip

Efficient processors help. Many modern watches use two chips: a powerful one for the busy stuff and a very low-power one for basic tracking, so the main chip can sleep.

4. Sensors

Constant heart rate monitoring, blood oxygen readings, skin temperature, ECG on demand and continuous stress tracking each draw some power. Most are small individually, but they add up.

5. GPS

GPS is hungry. Using it continuously while running or hiking drains the battery much faster than normal wear. That’s why makers publish a separate “GPS mode” figure, which is much lower. If you track long outdoor sessions, that’s the number to look at. Some watches offer a power-saving GPS mode that samples less often, at some cost to track accuracy.

6. Connectivity

  • Bluetooth to your phone is cheap.
  • Wi-Fi uses more.
  • Cellular (LTE) watches that can make calls and use data without your phone are the heaviest drainers, especially when the signal is weak.

7. Notifications and calls

Every buzz lights the screen and runs the motor. Taking calls on the watch uses the speaker and microphone and a lot of power. Lots of notifications from lots of apps mean lots of wake-ups.

8. Battery size and physical design

A bigger case allows a bigger battery. Thin, elegant watches often pay for it in endurance. Rugged sports watches tend to be thick, and usually last longer.

9. Temperature and age

Cold weather reduces battery performance temporarily. And after a couple of years, any lithium battery holds less than it did when new, so your watch will gradually last a bit less.

How the numbers are produced

Makers test under controlled conditions, usually with a standard set of activities: a certain number of notifications, a workout every day, brightness at a given level, always-on turned on or off. Change those conditions and the result changes.

So read the small print:

  • Is “always-on display” counted as on or off?
  • Is the quoted figure for smartwatch mode, GPS mode or something else?
  • Does it include a workout every day?
  • Is it with cellular on?

A watch that says “up to 14 days” may last a few days with the screen always on and daily GPS runs. A watch that says “up to 2 days” may easily last 3 if you turn off the always-on screen and some sensors. Treat the claim as the best case and expect to land below it.

Typical groups, without exact numbers

Rather than quote figures that vary by model and age, here is how the main kinds tend to behave:

Type Typical pattern
Full-featured smartwatches with bright colour screens Charge every day or every couple of days
Fitness bands with small screens Several days to a couple of weeks
Sports watches with efficient screens One to several weeks in everyday mode; much less in continuous GPS
Cellular smartwatches Often shorter, especially with calls and data

These are tendencies, and exceptions exist. Fitness trackers vs smartwatches compares the types in more detail.

How to make yours last longer

  1. Turn off the always-on display, or use raise-to-wake.
  2. Lower the brightness to a comfortable level, not maximum.
  3. Use a simpler watch face. Dark faces on OLED screens save power, and animated or data-heavy faces can use more.
  4. Cut notifications to the apps that matter. Fewer interruptions also helps you. Smartwatches for people who hate notifications goes into setting that up.
  5. Reduce heart rate and other sensor frequency if you don’t need constant readings.
  6. Use a power-saving GPS mode for long activities.
  7. Switch off Wi-Fi and cellular if you don’t need them.
  8. Disable wake-ups from gestures, if the watch lights up every time you move your arm.
  9. Keep the software updated. Updates sometimes improve battery use, and sometimes cause problems, so read the notes.
  10. Turn off features you never use, such as voice assistants or unneeded complications.

Try changing one setting at a time and see how the battery behaves over a couple of days. That tells you what is draining yours, rather than guessing.

Charging habits

Treat a watch battery like a phone battery. Keeping it between roughly 20 and 80% most of the time is gentle on it, though few people want to be that careful. Don’t leave it in a hot place, don’t charge it under a pillow and use the charger that came with it, or a good quality equivalent. Charging overnight: does it really damage your battery? explains the same idea for phones.

If you want sleep tracking, find a daily slot for charging that isn’t overnight: while you shower or have breakfast is often enough for a fast charger to top up.

When it’s time to replace

If your watch dies far earlier than it used to, a battery replacement is worth checking before you buy a new one. Some makers offer a service. Others don’t, or the repair costs close to the price of a new watch. Also check how long the maker supports the watch with software updates, because a watch that stops getting updates becomes a security and compatibility problem long before the battery gives up.

What to look for when buying

  • The battery figure in the mode you’ll use most.
  • A screen type that suits where you’ll wear it. Sunlight readability matters outdoors.
  • Fast charging, if you’ll top up daily.
  • A design you can live with. If you don’t want to charge daily, don’t buy a model that needs it.

Key takeaways

  • Battery claims depend on the screen, sensors, GPS and connectivity, plus the test conditions.
  • The always-on display and GPS are the biggest drains.
  • Spec sheets show the best case; expect less.
  • A few settings can add a lot of time.

Which of your watch’s features do you really use every day, and which could you switch off to gain a day of battery?