Blog / Phones & Gadgets /

TV buying basics: sizes, panels and refresh rates

Walk into a TV shop (or open a TV page online) and you meet a wall of letters: LED, QLED, OLED, Mini-LED, HDR10, Dolby Vision, 120 Hz, “motion rate 2000.” Most of it is marketing. A handful of things decide whether you’ll be happy with the screen in your living room, and they’re easier than they look.

Here’s what matters, in order, and what you can safely skip.

1. Size: bigger than you think, within reason

People nearly always buy a TV that’s smaller than they’d be happiest with. A screen looks huge in a shop, then shrinks the moment it’s on your wall.

A rough rule: sit at about 1.2 to 1.6 times the screen’s diagonal measurement if it’s a 4K TV. So for a 55-inch set, roughly 1.7 to 2.2 metres. Closer than that, you start seeing individual pixels on lower-resolution content. Much further, and the extra size is wasted.

Before you buy:

  • Measure your room and your furniture, not just the wall. The TV unit and the stand matter.
  • Check the actual width of the TV, which is not the same as the diagonal.
  • Think about the doorway and stairs, especially for very large sets.
  • Check the weight if you plan to wall-mount.

If the choice is between a slightly larger TV with an okay panel and a slightly smaller one with a better panel, many people end up happier with the bigger one in a normal living room. If you watch in a dark room, panel quality counts for more.

2. Resolution: 4K is the sensible default

For TVs bigger than about 40 inches, 4K (3840 × 2160) is now standard and hardly costs more than 1080p. There’s little reason to choose lower on a large screen. 8K exists but there’s very little 8K content, so for most people it’s a waste of money.

A caution: a 4K TV only looks 4K when the source is. Streaming apps, a decent internet connection, and a bit of setup matter. How streaming video works explains why the same film can look very different depending on the connection.

3. Panel type: the biggest difference in picture

This is the one that really changes what you see. The names are confusing, so here they are plainly.

Type How it works Strengths Weaknesses
LED (LCD) A backlight shines through a liquid crystal layer Bright, affordable, wide range of prices Black looks grey in a dark room; contrast depends on the panel type
QLED An LCD with a quantum dot layer for richer colour Brighter, more vivid colours than a basic LED Still an LCD, so still has backlight limits
Mini-LED An LCD with a much more finely controlled backlight Better contrast and brightness Can have slight halos around bright objects on dark backgrounds; cost more
OLED Every pixel makes its own light Perfect black, great contrast, wide viewing angles Less bright in sunny rooms; usually costs more

“QLED” is a name used by particular manufacturers for LCD sets with quantum dots, so it’s not the same technology as OLED, despite the similar letters.

Within LCD sets there are two common panel types too:

  • VA panels have deep blacks and strong contrast but narrower viewing angles.
  • IPS panels have wider viewing angles but less contrast, so blacks look greyer.

If you sit directly in front and watch in a dim room, VA or OLED will look richer. If people watch from the sides, IPS or OLED copes better.

What about your room?

  • Bright room, lots of windows, daytime viewing: pick a bright LCD (QLED or Mini-LED). OLEDs have got brighter but are still more affected by glare.
  • Dark room, film nights: OLED or a good Mini-LED will look best.
  • Mixed use: a middle-priced LCD with good brightness is the reasonable choice.

4. Refresh rate: 60 Hz or 120 Hz

Refresh rate is how many times per second the screen redraws the picture. Most sets are either 60 Hz or 120 Hz.

  • For films, TV and streaming: 60 Hz is fine, because most content is made at 24, 25, 30 or 60 frames per second.
  • For gaming on a modern console or PC: 120 Hz helps with smoother motion, and some games offer 120 fps modes. You’ll also want the TV to support it over its HDMI ports, and a variable refresh rate feature (often called VRR) to keep things smooth.
  • For sport: 120 Hz can make fast motion a bit smoother, but panel quality matters more than the number.

Ignore “motion rate” numbers like 1000 or 2000. They’re invented marketing figures and can’t be compared between brands. Look for the native refresh rate: 60 or 120.

If you plan to game at 120 fps in 4K, check the specifications for an HDMI port that supports it. Often only some ports on the back of a TV do, and they’re labelled.

5. Brightness and HDR

HDR (high dynamic range) lets a TV show brighter highlights and deeper shadows in the same picture. It only works well if the TV can actually get bright. A cheap TV that says “HDR” on the box may accept an HDR signal but not look any better with it.

What matters:

  • Peak brightness, if the manufacturer or a reliable review gives it.
  • Local dimming on LCD sets, which turns parts of the backlight down to improve contrast.
  • HDR format support. HDR10 is universal. Dolby Vision and HDR10+ are extra formats that some TVs and apps support.

If you’re on a tight budget, brightness and contrast matter more than a long list of HDR names.

6. Smart features: don’t overlook the software

A TV’s menu and apps are what you’ll look at every day. A slow, ad-heavy interface is irritating, even on a great panel. Different TVs use different systems, and support for updates varies. The post on smart TVs and why the software matters as much as the screen goes deeper. A cheap streaming stick or box plugged into a good “dumb-ish” panel is one way round a weak interface.

7. Ports and sound

  • HDMI ports: count them. Consoles, a soundbar, a streaming box and a laptop add up fast.
  • eARC/ARC: lets you send good sound to a soundbar through one cable.
  • Ethernet port: useful if your Wi-Fi to the TV is weak. Ethernet still matters explains why.
  • Sound: thin TVs have thin speakers. A soundbar is the simplest upgrade for dialogue.

What to ignore

  • “Motion rate” and “image engine” numbers.
  • 8K, unless you have a very large screen and a reason.
  • Curved screens. They’re mostly a gimmick on TVs.
  • Brand-exclusive buzzwords with no explanation.
  • Showroom pictures. Shops turn brightness and colour way up. Check the TV in a normal mode, or read reviews that measure it.

A buying checklist

  1. Measure the space, the stand and the viewing distance.
  2. Pick the size first.
  3. Choose the panel by your room: bright, dark or mixed.
  4. Decide if you need 120 Hz (mostly gamers).
  5. Check ports: HDMI count and eARC.
  6. Look at the smart interface and how long updates are promised.
  7. Compare two or three models in a shop, with the same content.
  8. Think about the sound.

Which matters more in your home: a bright room or a dark one? That single answer narrows your choice more than any spec on the box.